Home » Posts tagged 'Stucco coating'

Tag Archives: Stucco coating

Three Styles of Stucco Installation

stucco installation

Stucco installation is often the last thing to be considered during a building renovation or remodel. Often, the contractors involved in the process feel that they can complete all of the necessary work to prepare for stucco installation and then come back and have the job covered with an additional coat of siding or some other type of exterior covering. That said, you don’t have to wait until the last minute to secure the best deals on stucco foam insulation.

One of the most important things you will need to consider is whether you have a history of leaking or failures on other walls or roof construction. If you do, that history will play into your decision about stucco coating and its application. There are several different reasons why a wall or roof may leak or even fail, in all honesty. Many of these failures can be traced to improper stucco installation. For example, cracked or missing shingles, sagging chimneys, plumbing leaks, and other roofing problems may result from poorly applied stucco coatings. Poorly applied finishes can also create other kinds of leaks or failures, including poor adhesion, weak joint integrity, and a lack of a vapor barrier.

Another important factor to consider when comparing stucco installation to that of other types of construction is the surface that will be exposed to moisture. As previously mentioned, the main reason a stucco coating becomes wet is that water has been penetrating the surface of the cement plaster over many years. Many of the world’s best stucco systems are based upon clay or other absorbent materials packed into a tightly molded and poured sheet. Clay is widely regarded as one of the superior moisture barriers, which is why many of the world’s greatest buildings and homes are constructed using this material.

Unfortunately, there are times when clay roofs and walls fail, and the homeowner is then faced with a variety of repair options. For this reason, many building exteriors now include building wall drainage plane systems that are embedded in the outer face of the home or building. This system is designed to assist in preventing condensation from building up on the exterior walls of a home or building by directing runoff away from the building exteriors and onto the ground. If properly installed, drainage plane systems can dramatically reduce the amount of water that ends up on the ground, as well as reduce the number of cracks, holes, and leaks that are created due to water escape. Many of these drainage systems have been specifically engineered for stucco installations, and they are often blended in with the cement plaster and used by most new home or building construction projects.

One of the most common building exteriors today is the traditional wall methods that have been used for hundreds of years. Traditionally, most homeowners used either nails or screws to attach their wooden panels to the exterior of their house. Over the years, however, it has become very common for them to use more modern wall methods like using a weep screed drainage system underneath the wood paneling to channel water away from the house. This is especially beneficial if you’re located in an area where there is a high water table; your water pipes will likely get clogged if they’re not properly drained and protected against water escape. Using a thin coat application of rubber under the wood is one way to make sure that water is drained away safely from your house.

Other types of wall methods available today include the use of stucco paints and sealants. These are much more affordable than having your home or building torn apart in the middle of the night due to water escape! You can choose between a variety of color options and finishes and will often need to do some additional work after your initial sealing and stucco application to bring your new look into fruition. Some of these coatings are also designed to be fade-resistant and withstand harsh weather conditions; however, this doesn’t mean that your existing paint isn’t able to serve its purpose.

If you’d prefer to avoid the traditional messy process of using muriaticum, eifs, and water, you might prefer to choose a different method of exterior wall surface protection. That’s where synthetic stucco comes into play! Synthetic stucco is actually sprayed on a smooth exterior surface such as brick, stone, or concrete before it’s allowed to dry. The spray is thick enough that any water that makes it past the surface will quickly evaporate, leaving behind a smooth surface that’s virtually impenetrable. You can purchase this type of product in either standard or flexible mediums, though flexible mediums are more widely used due to their ease in application and quick drying times. This style of coating can be applied in a wide variety of ways to create a plethora of surface treatments, so let your imagination be your guide.

The final option available to you when it comes to exterior wall treatments is the use of both acrylic and synthetic stucco. You can use a premixed acrylic or synthetic mixture as either an intermediate coat or as an all-over application to your walls. Either way, you can expect incredible results, as this style of coating will protect your home from the elements while adding significantly to its curb appeal. If you can decide what type of stucco is best for your property, you can visit this website https://www.stuccorepairhouston.net and find the perfect one that will help you achieve your goals.